fieldworkPosted by Vince Simmonds Tue, December 24, 2013 15:39:13
After yesterdays washout decided to stroll up to Whitcombe's Hole and draw/record the south east facing section photographed last week. Spent about an hour at the cave before returning home.
fieldworkPosted by Vince Simmonds Sun, December 15, 2013 15:47:54
It's a damp day and quite wet along the path to Whitcombe's Hole. At the cave it is noticeably wetter than last week moisture can be seen on the walls and there is an audible drip. Took a few minutes to sort myself out before digging commenced. Got a new tool kit roll to try out for the first time today!
The damp conditions made sieving a bit more difficult. It took a little longer than anticipated to remove some stubborn cave sediment [still some more to come off] so that any idea of drawing the section was put aside. Took some photo's though (see below)
South east facing section. Scale is 0.30 metres. Cave sediment:
Very compact [cemented] yellowish brown silty SAND & GRAVEL with some iron staining. Gravel is fine to coarse, subround to round of sandstone with occasional subangular gravel of limestone. There are some pockets of manganese wad and occasional fossil fragments mostly of crinoid stems. So far this material is devoid of any archaeological or palaeontological finds.
SE facing section in relation to the passage. Scale is 0.30 metres.
fieldworkPosted by Vince Simmonds Sat, December 07, 2013 16:40:50
Change of plans re: digging this weekend, didn't have a team for Hallowe'en Rift so decided to get on with Whitcombe's Hole a day earlier.
The image below is the view out of the entrance chamber to the opposite side of Burrington Combe.
Last week's gardening along the approach to the cave proved sufficient so I didn't need to trim any branches with the saw. Don't want the track too obvious.
The first job in hand was to do some tidying around the entrance. Emptied some of the spoil bags that had been left outside the entrance. The bags that were left inside the cave were then sieved over a 6.3mm x 300mm diameter wire mesh laboratory test sieve (BS410-1:2000). Unfortunately some of the spoil was too wet to sieve effectively and was discarded. Will bring a stiff brush next time which will be useful for cleaning the mesh. When the clearing up was finished I carried on with the digging, sieving the spoil before disposal. My plan is to tidy up the full section and then record; I will draw the section to include passage shape and dimension.
I cleared away the upper layer down to the lower cave sediment which will be removed next session before recording.
Buster, my Jack Russell, was getting a bit bored by now so called it a day and went to the Hunter's Lodge for lunch.
fieldworkPosted by Vince Simmonds Sun, December 01, 2013 17:16:31
I decided it was about time I took another look at Whitcombe's Hole after the dry year we've had. There were certainly a few changes on the approach to the cave, a lot of the scrub has collapsed and it was necessary to make a new path, will bring the saw next visit to clear some branches. At the cave, it is dry enough to restart the excavation and a new strategy was quickly formulated. Next weekend will revisit to get on with the project.
fieldworkPosted by Vince Simmonds Sun, October 14, 2012 13:15:05
I have to confess that the fieldwork that I intended to carry out at Whitcombe's Hole just hasn't happened. This is due mainly to the exploration work at Hallowe'en Rift, a particularly wet and crappy summer and a change of career - now employed as a Field Archaeologist and have been working on a number of sites in Gloucestershire, Somerset and Devon. Hopefully things will settle and the field work will commence albeit rather later than planned.
fieldworkPosted by Vince Simmonds Sun, May 13, 2012 18:27:07
A rather brief visit to carry some of the excavation kit to the cave followed by a little bit of a tidy up.
Rather surprisingly there wasn't too much debris blown into the site although it was pretty damp in the cave.
Brushed up some of the blown in debris in the entrance chamber but didn't venture further.
To follow up last years excavation there might be some merit spending some time ensuring that notihng has been missed before moving on.